C/C-SiC component for metallic phase change materials

Thanks to their high energy density and thermal conductivity, metallic Phase Change Materials (mPCM) have shown great potential to improve the performance of thermal energy storage systems. However, the commercial application of mPCM is still limited due to their corrosion behavior with conventional container materials. This work first addresses on a fundamental level, whether carbon-based composite-ceramics are suitable for corrosion critical components in a thermal storage system. The compatibility between the mPCM AlSi₁₂ and the Liquid Silicon Infiltration (LSI)-based carbon fiber reinforced silicon carbide (C/C-SiC) composite is then investigated via contact angle measurements, microstructure analysis, and mechanical testing after exposure. The results reveal that the C/C-SiC composite maintains its mechanical properties and microstructure after exposure in the strongly corrosive mPCM. Based on these results, efforts were made to design and manufacture a container out of C/C-SiC for the housing of mPCM in vehicle application. The stability of the component filled with mPCM was proven nondestructively via computer tomography (CT). Successful thermal input- and output as well as thermal storage ability were demonstrated using a system calorimeter under conditions similar to the application. The investigated C/C-SiC composite has significant application potential as a structural material for thermal energy storage systems with mPCM.     

Telesurgery QoS improvement over SDN based on a Type‐2 fuzzy system and enhanced cuckoo optimization algorithm

Telemedicine is a new area based on the information and communication technology for collecting, storing, organizing, retrieving and exchanging medical information. One of the most important applications of telemedicine is indeed telesurgery in which an efficient telecommunication infrastructure between the surgery room and remote surgeons need to be established. One of the most important issues to be tackled in telesurgery is to find favorable links for routing as well as providing high Quality of Service (QoS). In this paper, an efficient model based on the hybridization of Type‐2 Fuzzy System (T2FS) and Cuckoo Optimization Algorithm (COA) over the Software Defined Networks (SDN) is proposed in order to achieve optimal and reliable routes for telesurgery application. Using T2FS, the fitness of the links is determined; then, a COA is conducted over the Constraint Shortest Path (CSP) problem to find the best routes. Delay is considered as a CSP problem which is satisfied by trying to find the paths with minimum cost. Due to the NP‐completeness of the CSP problem, an Enhanced COA (so‐called E‐COA) is proposed and utilized as a metaheuristic solver. To the best of our knowledge, this paper is the first SDN‐based communication model that applies both T2FS and E‐COA for assigning proper costs to the network's links, and solves the consequence CSP problem according to the QoS requirement for telesurgery. The model also recognizes and preserves the second‐best routes in order to keep the reliability for such a critical application. In addition to the simulations, the performance evaluation is also conducted on a real experimental scenario. Many comparisons are carried out between the proposed model and other conventional methods, and the evaluation study shows the superiority of the proposed model on all the three QoS‐related metrics, i.e. average end‐to‐end delay, packet loss ratio and PSNR.     

Synthesis and properties of fluorescent light‐emitting polyamide hybrids with reactive nanosilica by epoxide functionalization

A series of poly(carbazole‐quinoxaline‐amide)s (PCQAs) containing phenyl and long alkyl chain as pendants was synthesized from polycondensation between a new diamine with a synthesized and several commercial dicarboxylic acids using Yamazaki's method. PCQAs had inherent viscosities and weight average molecular weights ( ) in the range of 0.48–0.62 dL g^?1 and 51,600–58,500 g mol^?1, respectively. These luminescent polymers are readily soluble in a variety of organic solvents and formed low‐colored and tough thin films. In this study, silane modified SiO₂ (mSiO₂) nanoparticles were prepared, characterized and used with PCQAs in preparation of nanocomposites via solution blending method. The interfacial interaction strength between mSiO₂ and the polymer–matrix enhanced thermal stability (T_10%, from 463°C to 500°C) and mechanical strength (from 100 MPa to 150 MPa) for composite containing 30 wt % mSiO₂ in comparison with the pure polyamide. These materials showed good ability for extraction–elimination of metal ions such as Cr⁶⁺, Cr³⁺, Co²⁺, Zn²⁺, Pb²⁺, Cd²⁺, and Hg²⁺ from aqueous solutions either individually or in the mixture at various pH. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40219.     

Synthesis and evaluation of the thermal properties of biosourced poly(ether)ureas and copoly(ether)ureas from 1,4:3,6‐dianhydrohexitols

A new series of poly(ether)ureas were prepared by solution polyaddition of three diamines based on 1,4:3,6‐dianhydrohexitols with three types of diisocyanate. The corresponding poly(ether)ureas were obtained with high yields. They were characterized by various analytical techniques (NMR, TGA and differential thermal analysis, DSC). NMR spectroscopy allowed us to confirm structure type and to optimize reaction conditions and DSC proved the high thermal properties of the products obtained (T_g and T_m in the range 126 ? 158 °C and 235 ? 330 °C respectively). Then, copoly(ether)ureas partially based on commercial diamines were synthesized in order to reduce polymer cost and tune their thermal behaviour. The reactivity of both diamines was evaluated by their incorporation in the polymer by means of NMR spectra. Then their thermal properties were compared with fully commercial diamine based polyureas by DSC studies. © 2014 Society of Chemical Industry     

Study the Performance of the AC/DC Resistors During Their DC and AC Measurements

Some of traceability chains for the AC resistance measurements are based on AC/DC resistors. In this paper, performance of two types of them with different values has been investigated for their optimum utilization. Tinsley and Cambridge AC/DC resistors have been measured as DC resistors using different measurement methods and as AC resistors at various frequencies. DC direct method using digital reference multimeter is more accurate for the resistance values 1, 10, 100 Ω, and 1 kΩ. For the values 10 and 100 kΩ; measurement results are very near by using the DC direct and ratio methods. At 100 kΩ; representation of the resistance as an equivalent series resistance is not suitable at frequencies above 10 kHz, while for 100 mΩ and 1 Ω; the equivalent parallel representation is not suitable above the same frequency. The uncertainty analysis is also studied for all the obtained results.     

Structure,Microstructure, Magnetic,Electromagnetic, and Dielectric Properties of Nanostructured Mn–Zn Ferrite Synthesized by Microwave-Induced Urea–Nitrate Process

In this work, the effect of urea-to-nitrate molar ratio on the synthesis and properties of Mn_0.5Zn_0.5Fe₂O₄ ferrite prepared by microwave-induced combustion method has been studied. The product powders synthesized at three different molar ratios of urea to nitrate (U/N ratio), varying from 0.58 to 1.08. X-ray diffraction patterns confirm formation of a spinel-type structure of ferrite and also hematite in the as-synthesized powders. The average of particle size is found to be in the range 30–80 nm. The values of saturation magnetization and permeability are increased with the increase in U/N ratio. Dielectric parameters were measured as a function of frequency. The real and imaginary parts of dielectric constant are found to decrease with the increase in frequency, while the ac conductivity is found to increase with increasing frequency. The complex impedance analysis shows only one semicircle indicating the predominant effect of grain boundary property of the material.     

Fully Automated Inductance Measuring System Using New Fabricated Inductance Box

Decade inductance boxes are widely used in electrical laboratories for calibration of instruments that measure inductance. The main aim of this paper is to construct a new inductance box providing a huge number of automated inductance steps, which are used in the laboratories to perform full automatic calibration of inductance meters. Therefore, a new inductance box has been introduced that mainly consists of three decades. The three inductance decades have the same design, but each has its four different internal inductive elements. Each decade can generate 15 different inductance values, so it is more economical and practical compared to the other ordinary decades, which produce only 10 values by using 10 internal inductive elements. 1666 different inductance values can be obtained from this inductance box, while 4096 inductance values can be obtained by the possible combinations of its three decades steps. Practical design, fabrication and specifications of this new inductance box are demonstrated in detail. It is designed to achieve relative accuracy in the range from 5 × 10^?4 to 5 × 10^?3. It could be used to perform full automatic inductance measurements at the National Institute of Standards, Egypt, for the first time. Comparison between an ordinary inductance box and the new introduced one has been made to validate its performance.     

Network virtualization: state of the art and research challenges [Topics in Network and Service Management]

Recently network virtualization has been pushed forward by its proponents as a long-term solution to the gradual ossification problem faced by the existing Internet and proposed to be an integral part of the next-generation networking paradigm. By allowing multiple heterogeneous network architectures to cohabit on a shared physical substrate, network virtualization provides flexibility, promotes diversity, and promises security and increased manageability. However, many technical issues stand in the way of its successful realization. This article investigates the past and the state of the art in network virtualization along with the future challenges that must be addressed to realize a viable network virtualization environment.     

Recent advances in autonomic communications [Guest Editorial]

The nine papers in this special issue focus on recent advances in autonomic communications. This issue addresses four areas in which autonomics play a central role: network architectures, traffic management, monitoring, and resource management.     

Construction and remote calibration of an automated resistance measuring system

The calibration of resistances was being performed manually at National Institute of Standards (NIS), Egypt till now. In this paper, a fully automated system for the remote calibrations of resistances is described. This sytem is mainly used for routine calibrations for low precision calibrations. The calibration of many resistors can be performed in this system automatically through the Resistors Automatic Changer which is controlled by a LabVIEW program developed and described in the present research work. Not only these calibrations of resistances are performed automatically but are also controlled remotely via an internet connection. Some simple remote and automated resistance measurements are carried out just to confirm our new measuring system.